all power 3500 watt portable inverter generator

All Power 3500 watt Portable Inverter Generator – How to Use it?

The All Power 3500 watt Portable Inverter generator is a compact and efficient portable generator with proven power and portability. Take this small generator on camping, tailgate or use as back-up power at your home or mobile cabin. Its peak wattage of 3500 watts makes the APG3500is quite a powerful machine, having an air cooled, turbo charged, two-stage diesel engine. To give the unit more reliability and endurance, the unit comes with an eight-year limited factory warranty.

If you are using the unit in the outdoors, you should ensure that it is waterproof and dust proof. Before using the portable generator, make sure that all connections, including the three-wire grounding cables are properly insulated and the rubber sealing gaskets are intact. You should also keep a watch on the temperature of the tank to avoid any overheating problems.

The All Power inverter generator comes with a handy remote control. Once you have connected the unit to the main power source, you can start using it straightaway. Just as long as there is power available in the area, this device will continue to work until the break or power cut.

When it comes to the safety concerns, this unit is top-notch. It has been designed so that there is no possibility of an electrical overload. The automatic switch-off feature takes care of automatically stopping the unit when the power is cut. For safety’s sake, the blades are encased in thick non-corrosive materials. The manual safety switch and warning light are located easily within easy reach.

One of the best features of the All Power Portable Generator is that it comes with a dual voltage rating. This means that you can use it even if your home uses a different voltage. This is very handy if you have an RV, boat, or a cabin in the woods.

To operate this unit efficiently, you need to make sure that you connect the AC to the unit’s main battery. This ensures that all the required current is provided to the unit. In addition, you also need to connect the solar cells to the unit.

If you intend to use the generator at night, then you should place it at a location where it will receive some sunlight. It will work perfectly fine at noon as well. However, make sure you place the unit away from any objects that might obstruct the sunlight. Also, you should place the unit away from any other combustible material.

For maximum performance, it is recommended that you clean the unit regularly. You should remove all debris and clean the blades and connections using a wire brush. While cleaning, you should use a non-corrosive cleaner. Otherwise, the unit will corrode over time.

Once the unit is cleaned and all the parts are clean and ready, you can start using it. You should plug the wires into the main battery. However, you should never attach the unit directly to the battery. Instead, you should use an extension cord to connect the unit to your main electricity line.

You should start the motor by switching the switch on. Next, you should switch the switch off. Make sure that you use the appropriate connection cables for the unit. If you connect them directly to your main unit, you might experience excessive voltage.

Check the connection section and locate the ground wire. You should also check the fuse box. When these parts are complete, you should close the unit. The generator will automatically turn on. Then, you can start using it.

One of the most important things that you need to do is to test the unit. This means that you should always use a level to ensure that the system works. Finally, you should not connect any other devices to this unit until you test it.